Motor
Valves & Valve Accessories
Electrical Parts
Pressure Controls & Switches
Circuit Breakers
Thermostats
V-Belts & Pulleys
Piston & Piston Body
Control Boards
All products
New
MARS 3 Wire condenser fan motors replicate OEM wiring for condenser fan motors speeding installation and saving time. Condenser fan motors are designed for either shaft-up or shaft-down applications. End shields are enclosed for weather protection. A weep hole is provided in each end shield to allow condensate to drain. All of these motors are suitable for air conditioning or heat pump applications.
Features:
- All angle, ball bearing
- Rheem mounting holes w/screws installed
- Water slinger on shaft
- Thru bolt or band mounting
- Capacitor requirement noted on motor label
- Double full flatted shaft
Specifications:
- Motor Type: PSC
- Enclosure: TEAO
- H.P. (Max.): 1/4
- Voltage: 208-230
- Speeds: 1
- Hz: 60
- Rotation: REV
- RPM Range: 1075
- NEMA Frame Size: 48
- Phase: Single
- Standards: CUL
- FLA: 1.8
- Mount: All Angle
- Bearing: Ball
- Shaft Length Inches: 6.5
- Shaft Dia Inches: 1/2
- Thermal Protection: Auto
- Ambient Deg C: 60
- Ins. Class: Class B
- Capacitor Included: No
- Capacitor Rating: 5/370
- 36 inch leads
- Fan duty, continuous, air over
- Totally enclosed
Maintenance & Troubleshooting:
- Pressure switches are commonly replaced when a furnace or HVAC system will not complete its startup sequence due to pressure/airflow proving issues.
- Customer feedback commonly associates replacement with resolving a "pressure switch" fault condition and restoring normal operation.
- The provided sources do not include diagnostic procedures; follow the equipment documentation for troubleshooting steps and verification before replacement.
User Reviews & Q&A Summary:
- Review themes indicate the part is commonly described as an exact fit and used as a direct replacement to get a furnace running again.
- Several reviews mention the unit returned to normal operation after installation, including clearing a fault condition related to the pressure switch.
- Additional feedback highlights ease of ordering and timely delivery, and notes that this part fit where other attempted parts did not.
Certifications & Compliance:
- Rheem includes a California Proposition 65 warning for this pressure switch kit on its parts listing
- No other separate certifications or listings are explicitly stated for this part in the provided sources
User Reviews & Q&A Summary:
- Common review themes: direct-fit replacement that fixes "no heat" situations and gets the furnace running again, often described as an easy swap once accessed
- Several reviewers note this is an updated version of the original design and may mount differently (users mention included hardware such as a longer screw/spacer to accommodate the revised mounting)
- Q&A themes emphasize that pressure switch ratings/markings are not interchangeable by appearance alone; customers are advised to confirm the correct part by furnace model/serial rather than substituting based on pressure markings
Product Highlights
1/4 HPÂ Â Â 
208/230V Â Â Â 
1075 RPM Â Â Â 
ReversibleSpecs
| Horse Power: | 1/4 |
|---|---|
| Voltage: | 208/230V |
| Shaft Length: | 6-1/2" |
| Shaft Diameter: | 1/2" |
| RPM: | 1075 |
| Product Type: | Condenser Fan Motor |
| Speeds: | 1 |
| Frame: | 48 |
| Rotation: | Reversible |
| Enclosure Type: | Totally Enclosed Air Over (TEAO) |
Reviews
Clear filtersThere are no reviews yet.