Motor
Valves & Valve Accessories
Electrical Parts
Pressure Controls & Switches
Circuit Breakers
Thermostats
V-Belts & Pulleys
Piston & Piston Body
Control Boards
All products
New
Lau, 1" Sealed Iulator Ball Bearing with Interlocking Thrust Collar (Pack of 2)
For use when operating conditions exceed the limits of sleeve bearings or where repetitive failures occur. These bearings are pre-lubricated at the factory and require no further lubrication or attention. They are equipped with seals to retain grease better and to protect against contaminants.
For use when operating conditions exceed the limits of sleeve bearings or where repetitive failures occur. These bearings are pre-lubricated at the factory and require no further lubrication or attention. They are equipped with seals to retain grease better and to protect against contaminants.
Specifications
- Dimension (In.) K 37/64
- Dimension (In.) L 1-11/16
- Dimension (In.) O.D. 4.15
- 3L Belts Max. Pitch 3.5
- 3L Belts Min. Pitch 2.7
- 3L Belts Turns Open 0
- 4L or A Belts Max. Datum 3.8
- 4L or A Belts Min. Datum 2.8
- 4L or A Belts Turns Open 5
- 5L or B Belts Max. Datum 4.1
- 5L or B Belts Min. Datum 3.1
- 5L or B Belts Min. Turns Open 6
- 5V Belts Max. Pitch 3.5
- 5V Belts Min. Pitch 2.7
- 5V Belts Min. Turns Open 6
- Outside Diameter (In.) 4.15
- Dimension (In.) F Max. 1
- Dimension (In.) F Min. 5/8
- Dimension (In.) G Max. 7/8
- Dimension (In.) G Min. 1/2
- Stock Bore (In.) 5/8
- 3L Belts Min. Turns Open 4
- 3L Belts Max. Turns Open 0
- 4L or A Belts Min. Turns Open 5
- 4L or A Belts Max. Turns Open 0
- 5L or B Belts Max. Turns Open 1
- Pulley Type 1
Â
Specifications
- Dimension (In.) K 21/32
- Dimension (In.) L 1-7/8
- Dimension (In.) O.D. 3.75
- 3L Belts Max. Pitch 3.1
- 3L Belts Min. Pitch 2.3
- 3L Belts Turns Open 0
- 4L or A Belts Max. Datum 3.4
- 4L or A Belts Min. Datum 2.4
- 4L or A Belts Turns Open 0
- 5L or B Belts Max. Datum 3.7
- 5L or B Belts Min. Datum 2.7
- 5L or B Belts Min. Turns Open 6
- Outside Diameter (In.) 3.75
- Dimension (In.) F Max. 1-1/16
- Dimension (In.) F Min. 11/16
- Dimension (In.) G Max. 7/8
- Dimension (In.) G Min. 1/2
- Stock Bore (In.) 1/2
- 3L Belts Min. Turns Open 4
- 3L Belts Max. Turns Open 0
- 4L or A Belts Min. Turns Open 5
- 4L or A Belts Max. Turns Open 0
- 5L or B Belts Max. Turns Open 1
- Pulley Type 1
Maintenance & Troubleshooting:
- Pressure switches are commonly replaced when a furnace or HVAC system will not complete its startup sequence due to pressure/airflow proving issues.
- Customer feedback commonly associates replacement with resolving a "pressure switch" fault condition and restoring normal operation.
- The provided sources do not include diagnostic procedures; follow the equipment documentation for troubleshooting steps and verification before replacement.
User Reviews & Q&A Summary:
- Review themes indicate the part is commonly described as an exact fit and used as a direct replacement to get a furnace running again.
- Several reviews mention the unit returned to normal operation after installation, including clearing a fault condition related to the pressure switch.
- Additional feedback highlights ease of ordering and timely delivery, and notes that this part fit where other attempted parts did not.
Certifications & Compliance:
- Rheem includes a California Proposition 65 warning for this pressure switch kit on its parts listing
- No other separate certifications or listings are explicitly stated for this part in the provided sources
User Reviews & Q&A Summary:
- Common review themes: direct-fit replacement that fixes "no heat" situations and gets the furnace running again, often described as an easy swap once accessed
- Several reviewers note this is an updated version of the original design and may mount differently (users mention included hardware such as a longer screw/spacer to accommodate the revised mounting)
- Q&A themes emphasize that pressure switch ratings/markings are not interchangeable by appearance alone; customers are advised to confirm the correct part by furnace model/serial rather than substituting based on pressure markings
Product Highlights
1"Â Â Â 
2-17/32" ODSpecs
| Product Type: | Bearing |
|---|---|
| Size: | 1" |
| Outside Diameter: | 2-17/32" |
Reviews
Clear filtersThere are no reviews yet.